-
Which cutting discs and grinding discs can be used for standard materials such as St37 in metalworking shops?
-
The standard KSM quality should be used for this work as both a cutting disc and grinding disc for rough work. The flap discs LSZ-FS or LSA-PA in various grain sizes are best used for slurring welding seams and preparing for painting, galvanizing or plastic coating.
Qualities: XT10 XTK10 XT8
-
What are the advantages of extra-thin cutting discs?
-
The cutting time can be reduced by up to 50 %
Dust reduction up to 50 %
Little sparking
Low noise
Low machine load, thus longer service life of machine
Low drive output needed
Cutting is possible with weak machines too
Low development of odour
Few combustion residues from the iron such as SO2 and CO2
Lower power consumption
Fewer burrs, thus reduction of the risk of injuries
Lower material losses, very important with stainless steel
Less reworking
Narrow cutting joints that can be easily welded during fitting
Sympathetic vibrations in thin steel sheets can be almost excluded
Qualities: << XT 20 >> XTK20 XT8, FT67
-
Rail cutting equipment: What causes faults in the cutting performance?
-
Dirty air filters, V-belt tension, wrong cutting, poor discs
-
General mild steels: Which cutting discs and grinding discs can be used for standard materials such as St37 in metalworking shops?
-
Universal cutting discs and grinding discs. Flap grinding discs with a brown, normal aluminium-oxide cover
-
Stainless and acidproof steels: Which discs can be used to process stainless steels?
-
Use tools that are free from iron and sulphur. Fe < 0.1%, S < 0.1% KWU Certificate Class II fireproof steels only with TOP quality
-
Thin metal sheets, pipes, profiles: Which cutting discs can be used to cut thin steel sheets, pipes und profiles with as few burrs as possible?
-
Extra thin cutting discs are ideal for this work
-
Non-ferrous metals: Which discs can be used for oily non-ferrous metals?
-
Only special discs that cannot become clogged. The surface of the flap discs or vulcanized fibre discs must be treated against clogging before grinding. (Spray or grinding paste)
-
Stone: Which discs can be used to produce visible edges on glazed tiles, window sills and steps?
-
Extra-thin cutting discs with a very fine grain and smooth sides. Diamond discs with a closed cutting edge
